Ngā Tātari Kowiri tira, Parahi me te Titanium Porous Metal kua whakakōpikopikotia mō te Tātari Hau me te Wai
Ka hangaia ngā tātari whakarewa pūwero mā te whakamahi i te paura whakarewa kua whakatōngia hei hanga i tētahi tino
hanganga porous ōrite mō te tino tikatātari hau me te wai.
Kei te wātea ngā tātari whakarewa pūngāwerewere HENGKO i roto i te kowiri tira 316L, te parahi, te titanium,
me ngā rauemi nikara me ngā rahi o ngā pūwero mai i0.1 μm ki te 100 μm.
E whakamahia whānuitia ana ēnei tātari i roto i te haurua-ā-ira, te rongoā, te pūngao hauwai,
me ngā ahumahi tukatuka matū.Ngā āhua ritenga tae atu kingā ngongo, ngā kōpae, ngā koeko,
me ngā kāteretie wātea ana mōNgā tono tātari OEM.
Te Wheketere Tātari Konganuku Porowhita
– Ngā Tātari 316L / Parahi / Titanium kua whakakikoruatia
Ngā tātari konganuku pūngāwerewere mahi-teitei i hangaia mō te tātari hau me te wai tika.
Kei te wātea te whakatauranga maikoroni ritenga, te rahi, te hanganga, me te tapanga tūmataiti OEM.
He tohunga a HENGKO kingā tātari whakarewa porous kua whakakinohia, ngā huānga tātari kowiri tira porous,
mengā wāhanga kua whakatōngia ritengamō ngā tono ahumahi uaua.
Neke atu i te 20 tau o te wheako hanga, ka tukuna e mātou ngā tātari he kaha ā-mīhini teitei,
hanganga pūwero pumau, he ātete pai rawa atu ki te waikura, ā, he roa te ora mahi.
- Rauemi:Kowiri tira 316L / Parahi / Taitānia / Nikara
- Rahi o ngā Pūwero:0.1 µm – 100 µm
- Te Whai Hua o te Tātari:Tae atu ki te 99.9%
- Ātete ki te pāmahana:Tae atu ki te 600°C
- Ngā tono:Tātari Hau me te Wai
Ahakoae hiahia ana koe0.1–100 µmwhakatauranga maikorona,316L / Ti / Ni koranungā rauemi, ngā ritenga rāneingā ngongo, ngā kōpae, ngā koeko,
me ngā kātere, ka tukuna katoatia e HENGKOOEM/ODMtautoko hangarau me te mana whakahaere kounga taumata ISO.
Whakapā mai mō tāu kaupapa tātari whakarewa porous:ka@hengko.com
ka whakahokia atu e mātou i roto i ngā haora 24.
Tonoa he Tātari Whakarewa Pūwero Ritenga
-
Te ātete pāmahana teitei, te pēhanga, te tātari parahi parahi parakore, ngā maikoroni ka taea te whakamahi anō ...
Ka taea e ngā ngongo tātari porous HENGKO te hangai, te hangai rānei, ā, ko te matotoru o te pakitara he 1 mm te iti rawa. Ka hangaia ēnei mā te whakakīkī isostatic o te paura i roto i te mo ngāwari...
Tirohia ngā Taipitopito -
Ngongo tātari moroiti porous whakarewa mō ngā paipa wera pūnaha wera...
Ka pupuhi/ka whakamātao te hanganga o te konganuku pūwero me te pūwero tino ōrite i te wai mai i te puna wai mā roto i te hanganga konganuku pūwero, ā, ka whakamahia te...
Tirohia ngā Taipitopito -
Mata iso mowhiti pokapū korehau hou, tātari konganuku porowhita kua whakakinohia
Ko ngā mowhiti pokapū me te Tātari Konganuku Whakakotahi ngā wāhanga paerewa mō ngā tono korehau me te korehau teitei katoa. Ko ngā mowhiti pokapū me te tātari konganuku whakakotahi...
Tirohia ngā Taipitopito -
Ngā wāhanga tātari pūwero haukū whakarewa parahi parahi sintered micropore 3 70 micron
Ka whakamahia e ngā Tātari Pūwero Hauātea ngā huānga tātari parahi hauātea kua herea ki ngā hononga paipa paerewa. Ko ēnei pūwero hauātea kiato, iti hoki te utu ...
Tirohia ngā Taipitopito -
tātari putanga parahi paura whakarewa porous kua whakatakahia, he mea whakangāwari te tātari haruru...
Ka whakamahia e ngā Tātari Pūrere Whakakā Hau te huānga tātari parahi whakakā hau kua herea ki ngā hononga paipa paerewa. Ko ēnei pūrere whakakā kiato, iti hoki te utu ...
Tirohia ngā Taipitopito
1. Whakataki ki ngā Tātari Konganuku Pōro
(He aha rātou, ā, he aha hoki i tino hira ai)
Ngā tātari konganuku pūngao—e mōhiotia ana ko ngā tātari konganuku kua whakatōngia, ngā tātari maitai kore pūngao,
ngā huānga porous kua whakakinohia—he wāhanga whakarewa hangarau kei roto he tino ōrite
Whatunga ahu-toru o ngā pūwero e hono tahi ana.
Ka hangaia ēnei pūwero mā te whakamahi i te puehu whakarewa i roto i te korehau i ngā pāmahana kua whakahaeretia, ka hanga he āhua pakari,
he hanganga kaha-nui, uru-wai hoki, ka taea te tātari me te whakahaere rere tika.
Nā te kaha ā-mīhini, te ātete ki te waikura, te pumau, me te ngāwari ki te whakamahi anō,
E whakamahia whānuitia ana ngā tātari whakarewa porous i roto i:
-Ngā taputapu hiko-haurua(CVD / PVD / Etch / Diffusion / ALD)
- Ngā tātari haume ngā taputapu kimi hau
- Pūwero KF / VCR / ISOngā pūnaha flange
- Wahie haume te purenga hauwai
- Ngā pūoko aroturuki taiao
- Ngā pūnaha matū me te hinu-matū
- Ngā ahumahi rongoā me te tukatuka koiora
- Hau pāmahana teitei/waitātari
- Te whakamātau,te whakapūngao hau, me tekōhatu horapa maitai kore waikurangā pūnaha
- Te whakataurite i te rere me tete aukati mura
Ka whakaratohia e te tātari whakarewa porous te mahi tātari pumau me te tika,
ahakoa i raro i ngā taiao uaua e pā ana ki te pāmahana teitei, te pēhanga teitei, ngā matū waikura,
ngā kawenga huringa, ngā hau kaha rānei.
2. He aha koe i whiriwhiri ai i a HENGKO hei wheketere tātari whakarewa porous māu?
He kaihanga ngaio a HENGKO e tohunga ana ki ngā tātari whakarewa porous kua sintered,
ngā huānga tātari kowiri tira pūwero, ngā ngongo/kōpae kua whakakōpiritia, me te OEM ritenga
ngā wāhanga pūwero e whakamahia ana e ngā waitohu pūoko o te ao me ngā umanga ahumahikōhatu horapa ahumahingā kaihanga pūnaha.
Neke atu i te 15 tau o te wheako R&D me te OEM mō te konganuku porous, ā, e whakarato ana mātou i:
✔ Ratonga OEM / ODM whānuitanga katoa
- Rahi maikorona ritenga (0.1–120 µm)
- Te pūngao ritenga (10–55%)
-Ngā āhua ritenga: kōpae / kapu / koeko / ngongo / kātere / poraka
- Ngā rauemi ritenga: 316L / Parahi / Taitānia / Nikara
- Mīhini tika CNC (NPT / BSP / UNF / VCR / KF / Flange)
- Te whakarewa taiaho me te hiri whakarewa
- Te whakairo waitohu me te tapanga tūmataiti
- Te hanga tauira + te hanga papatipu
✔ Hangarau whakamahana korehau matatau
- Ka whakarite kia pumaurahi o ngā pūwerotohatoha, kaha miihini teitei,
me te mahi rere pumau.
✔ Tautoko hangarau kaha
- Ngā miihini whai mātauranga ki ngā mahi hau, ki ngā mahi tātari, ki ngā rauemi whakarewa,
me te hoahoa pūoko.
✔ Pūnaha QC katoa
Te tātari rahi matūriki, te whakamātautau porosity, te kimi turuturu heriuma, te whakamātautau ātete pēhanga,
me te aromatawai hototahi matū.
✔ Te tere o te tono anō mai i ngā kaihanga ahumahi
- Ka tukuna e mātou ngā tātari whakarewa porous ki ngā kamupene i roto i:
haurua-ā-ira, taputapu, aroturuki taiao, hangarau matū,
ngā taputapu hau, te hinu matū, me ngā ahumahi taiwhanga.
Ehara a HENGKO i te kamupene hokohoko
—he wheketere OEM tika mātou, e whakarite ana i te kounga pumau
te whakaputa me te utu whakataetae.
3. Te Mahi a ngā Tātari Konganuku Pōro
(Whakamārama Taumata-Hangarau)
Ka mahi ngā tātari whakarewa pūwero mā roto i tētahi tukanga uaua engari tino uaua
te whakakotahitanga o te tikanga whakahaere:
3.1 Tātari Ā-ringa (Tikanga Matua)
Ka āraia ngā matūriki nui atu i te rahi o te pūwero mā te mīhini, ā,
e puritia ana i runga, i roto rānei i te hanganga pūwero 3-D.
3.2 Tātari Hōhonu
He rerekē ngā ara porous o ngā tātari whakarewa pūngoi i ngā mata mata, he matotoru hoki.
e tuku ana i ngā matūriki kia mau ki roto i te hohonutanga o te rauemi.
3.3 Te Horapa me te Āraitanga Ā-Inertia
I ngā taumata micron iti ake (0.1–5 µm), ka whakawhirinaki te hopu matūriki ki
Te nekehanga Brownian me te tukinga inertia.
3.4 Te Whakaōrite Rere Laminar
Ka whakaputahia e ngā konganuku pūngāwerewere te rere ōrite o te rere laminar, he mea tino pai mō:
- Ngā tātari hau
- Te whakataurite i te pēhanga
- Te kimi tukunga
- Ngā taputapu whakahaere rere
3.5 Te Whakamarumaru me te Whakapūngao
Ina whakamahia mō te tohatoha/te whakapūkara, ka haere te hau pēhanga mā roto i ngā pūwero moroiti,
te hanga i ngā mirumiru moroiti kia rite, kia matotoru hoki.
4. Ngā Kōwhiringa Rauemi mō ngā Tātari Konganuku Pōro
(Whakataurite Hangarau Katoa)
He maha ngā rauemi whakarewa a HENGKO e whakawhirinaki ana ki te tono, te taiao matū,
te utu, me ngā whakaritenga mahi.
Anei tētahi ripanga whakatairite taipitopito hei āwhina i a koe ki te arotake me te whakatairite i ngā rauemi tātari whakarewa porous rerekē:
| Rauemi | Ngā Painga Matua | Ngā Taupānga Pai rawa atu |
| 316L Kowiri tira (Tino rongonui) | • Te kaha ā-mīhini teitei | • Ngā pūnaha kimi hau |
| • He ātete pai rawa atu ki te waikura | • Ngā atanga KF / VCR korehau | |
| • Ka ātete ki te 200–500°C | • Tātari matū | |
| • He pai mō te nuinga o ngā hau me ngā wai | • Te tiaki i te pūoko | |
| • He utu whai hua, he pumau hoki | • Ngā pūnaha hauwai / hauota / hau kōpeke | |
| • He pai mō te tātari ahumahi whānui | ||
| Ngā Tātari Konukōre Parahi | • Utu iti iho | • Ngā pūnaha hau |
| • Kaha ā-mīhini āhua | • Ngā Whakangū | |
| • He pai te ōrite o te tātari | • Tātari hau putanga | |
| • He pai mō te tātari hau whānui | ||
| Ngā Tātari Porou Titanium (Mahinga Tino Teitei) | • Te ātete nui ki te waikura | • Tātari hau haurua-arataki |
| • Te hototahitanga koiora | • Ahumahi koiora hauora | |
| • Ātete pāmahana teitei tae atu ki te 600°C | • Ngā tukanga matū parakore teitei | |
| • Tino ma, he pai mō ngā tukanga nui | ||
| Nikara Koranu / Monel / Ngā Tātari Pore Inconel | • Ātete tino pai ki te waikura | • Ngā tukanga matū kino |
| • Ka ātete ki ngā hau tino waikura, tino waikawa rānei | • Ngā tauhohenga pāmahana-tiketike | |
| • Te kaha ā-mīhini teitei i raro i te kawenga huringa | • Tātari hau waikura |
5. Hangarau Hanga:
Te Hua o ngā Tātari Konganuku Porous Mahi-Teitei a HENGKO
Ko tā mātou mahi whakaputa e whakakotahi ana i te mahi whakarewa paura matatau, te sintering whakahaere, te miihini tika, me te whakahaere kounga taumata teitei.
6. Ngā Whakatakotoranga Hangarau o ngā Tātari Konganuku Porous
Me tutuki i ngā tātari whakarewa pūngāwerewere ngā tawhā hangarau tino pakari kia mau ai te mahi i roto i te pēhanga teitei, te pāmahana teitei,
ngā taiao waikura rānei. Kei raro nei he rārangi taipitopito hangarau e pā ana ki ngā wāhanga pore kua whakakāhia a HENGKO.
kia mōhio ai koe ki ngā taipitopito o ia rauemi ka taea te whakamahi i te konganuku porous.
6.1 Ngā Whakatakotoranga Hangarau Whānui
| Whakatakotoranga | Uara / Awhe | Ngā Tuhipoka |
|---|---|---|
| Whakatauranga Micron | 0.1–100 µm | PSD whaiti, hanganga pūmau o ngā pore |
| Pūngao | 10–55% | Ka taea te whakarerekē i runga i ngā whakaritenga rere/pēhanga |
| Matotoru | 0.2–10 mm | Kei te wātea te ritenga |
| Ātete Pēhanga Nui | Tae atu ki te 30 MPa | Kei te āhua me te matotoru |
| Awhe Pāmahana | -200°C ki te 600°C | Ia rauemi (316L, Ti, Ni koranu) |
| Tere Rere | Kua whakamātauhia kia rite ki ngā kōpiko API/ISO | Ngā raraunga rere e wātea ana |
| Ātete Matū | Tino pai | He pai mō ngā pāpāho waikura hau/wai |
| Tikanga Horoi | Horoi ā-orooro, horoi-muri, horoi matū | Ka taea te whakamahi anō |
| Ngā Rauemi | 316L / Parahi / Taitānia / Nikara Konumohe | Kōwhiringa rauemi OEM |
| Ngā Kōwhiringa Āhua | Ngongo, kōpae, kapu, koeko, kātereti, poraka | Tino whakaritenga |
| Whakarewa | Whakarewa taiaho / whakarewa TIG | Ārai turuturu |
| Mīhini | Te tika o te CNC tae atu ki te ±0.02 mm | Mō ngā miro me ngā flange |
6.2 Ngā Whakatakotoranga Kaha Mīhini
| Taonga | Uara Noa |
|---|---|
| Te Kaha o te Pehitanga | >150–300 MPa (316L) |
| Kaha Kume | 500–600 MPa (ka rerekē i runga i te rauemi) |
| Pēhanga Pakū | 5–30 MPa (e whakawhirinaki ana ki te OD/ID/matotoru) |
| Ōwehenga Poisson | 0.25–0.30 |
| Te Tauwehenga o te Rangatahi | 120–160 GPa |
6.3 Ngā Whakatakotoranga Mahi Tātari
| Tawhā | Whakaahuatanga |
|---|---|
| Te Tohatoha Rahi o ngā Pūwero (PSD) | Mā te tohatoha whaiti ka taea te matapae i te tātari |
| Tātari Hōhonu | Te hopu matūriki ā-roto maha-apa |
| Te Rere ōrite | Rere rere tino pumau |
| Te Āheinga o te Hau | He nui te uruhanga ahakoa i roto i ngā taumata 1–2 µm |
| Te Whai Hua o te Tātari Wai | 95–99.9% i runga i te rahi o te maikorona |
6.4 Tūtohi Hototahi Matū (Putanga Poto)
| Waenga | 316L | Taitana | Nikara Koranu | Parahi |
|---|---|---|---|---|
| Ngā waikawa | Pai | Tino pai | Tino pai | rawakore |
| Ngā kawakawa | Pai | Tino pai | Tino pai | Waenga |
| Ngā Whakarewa Ora | Tino pai | Tino pai | Tino pai | Pai |
| Wai Parakore Teitei | Pai | Tino pai | Pai | rawakore |
| Ngā Hau Whakahāora | Waenga | Tino pai | Tino pai | rawakore |
| Ngā Hau Waikura | Waenga | Tino pai | Tino pai | rawakore |
7. Aratohu Kōwhiringa Hua
(Maikorona • Rauemi • Āhua • Whakamahinga)
I konei ka whakarārangihia e mātou ētahi tohutohu e pā ana ki te rahi o ō pore, te āhua, me te
tono, ka taea e koe te tirotiro i ngā taipitopito e whai ake nei:
7.1 Me pēhea te whiriwhiri i te Whakatauranga Micron
| Rahi Maikorona | Te Whakamahinga i Manakohia |
|---|---|
| 0.1–0.5 µm | Tātari hau tino pai (hauārahi hiko, tātari taiwhanga) |
| 1–5 µm | Ngā tātari hau, ngā aukati mura, ngā whakataurite pēhanga |
| 10–20 µm | Te tiakitanga o te pūoko, ngā pūnaha tauira hau |
| 20–40 µm | Te purenga whānui o te hau me te wai |
| 60–100 µm | Te whakapūmau, te whakapūmau, te horapa |
7.2 Me pēhea te whiriwhiri rauemi
| Whakaritenga | Rauemi i Manakohia |
|---|---|
| Te ātete nui ki te waikura | Titanium / Nickel Alloy |
| Te pāmahana teitei (400–600°C) | Titanium / Nickel Alloy |
| Ngā kaupapa e aro nui ana ki te utu | 316L / Parahi |
| Ngā tono parakore teitei | Taitana |
| Te pēhanga kaha me te kawenga ā-mīhini | 316L / Nikara Koranu |
| Ngā hau hau-ārahi | Taitana |
7.3 Me pēhea te whiriwhiri i te āhua
| Āhua | Whakamahinga Take |
|---|---|
| Kōpae | Te tauira hau, te tātari ā-roto |
| Ngongo / Porotakaroa | Te whakapūmau, te horapa, te whakataurite pēhanga |
| Kapu / Kone | Te tiaki pūoko, ngā ārai mura |
| Kāritere | Ngā pūnaha ahumahi rere nui |
| Poraka / Pereti | Ngā tauhohenga matū, te tātari pāmahana-tiketike |
7.4 Me pēhea te whiriwhiri i runga i te ahumahi
| Ahumahi | Momo Tātari e Manakohia ana |
|---|---|
| Ārahi-haurua | Ngongo/kōpae porowhita titanium, 0.1–5 µm |
| Ngā tātari hau | Ngongo/kōpae 316L, 1–20 µm |
| Ngā pūnaha korehau | Ngā tātari KF/VCR 316L |
| Ngā tipu matū | Ngā kātere Ni-konumohe |
| Te aroturukitanga taiao | Ngā whare pūoko 316L |
| Ngā pūnaha whakapūmau | Ngā ngongo porous 20–100 µm |
8. Ngā Āwhio Rere me te Taka Pēhanga
Anei ngā āhuatanga rere whānui i runga i ngā hanganga tātari whakarewa pūwero HENGKO noa (ko te pihi tuturu e whakawhirinaki ana ki te taumata OD/ID/matotoru/micron):
8.1 Te Ārai Rere Hau (Tauira: 316L, 10 µm)
- Ka piki haere te rere ā-rārangi i ngā rerekētanga pēhanga iti
- Ka uru ki te pūnaha laminar i te 0.05–0.2 MPa
- Mā te papatahi pumau ka kore e pāorooro
- He pai mō te kimi hau, ngā pūnaha tauira
8.2 Te Āwhiowhio Rere Wai (Tauira: 316L, 20 µm)
- E hiahiatia ana te pēhanga teitei ake nā te matotoru
- Te pumau teitei i raro i te piki me te heke o te pāmahana
- He tino pai mō ngā waipiro, ngā hauwaiwaro, ngā whakarewa
9. Ngā Tauira Hua
(Kōpae • Ngongo • Kone • Kāritere • Whare Pūoko)
9.1 Ngā Tātari Kōpae Konukura Pūwero
Whakamahia ana i roto i ngā mīhini tātari hau, ngā pūnaha korehau, te tauira, me te tiaki pūoko.
| Tawhā | Awhe |
|---|---|
| OD | 5–120 mm |
| Matotoru | 0.3–5 mm |
| Whakatauranga Micron | 0.1–100 µm |
| Rauemi | 316L / Ti / Parahi / Ni koranu |
9.2 Ngā Ngongo Whakarewa Pōro (Ngā Tātari Porotaka)
He mea tino pai mō te whakapūkara, te whakapūngao hau, te whakataurite i te rere, me te tātari pēhanga teitei.
| Tawhā | Awhe |
|---|---|
| OD | 3–80 mm |
| Roa | 10–1200 mm |
| Matotoru o te Pakitara | 0.5–3 mm |
| Whakatauranga Micron | 0.2–60 µm |
9.3 Ngā Tātari Kapu/Kone Whakarewa Pūwero
Whakamahia i roto i ngā ārai mura, ngā whare pūoko, ngā pūoko hau.
| Tawhā | Awhe |
|---|---|
| OD | 3–50 mm |
| Teitei | 5–60 mm |
| Maikorona | 1–50 µm |
9.4 Ngā Kāritere Whakarewa Pūwero
Whakamahia i roto i ngā tipu matū, ngā tauhohenga, te tātari hau kōpeke.
| Tawhā | Awhe |
|---|---|
| OD | 20–80 mm |
| Roa | 50–1000 mm |
| Ngā Taupoki Mutunga | NPT / BSP / Flange / Ritenga |
| Maikorona | 1–40 µm |
Ngā Tātari Whare Pūoko Whakarewa 9.5
E whakamahia ana i roto i ngā pūoko pāmahana, haumākū, ira tomairangi, me te hau.
| Tawhā | Awhe |
|---|---|
| Miro | M10 / M12 / 1/4 NPT / Ritenga |
| Maikorona | 1–20 µm |
| Rauemi | 316L / Nikara Koranu |
| Momo Whare Noho | Kapu / Ngongo / Whakaritea |
10. Ngā Ahumahi Taupānga
Ka whakamahia ngā tātari whakarewa porowhita puta noa i50+ ngā rāngai ahumahi.
10.1 Te Hanganga Ārahi-Hau
- CVD
- PVD
- Te whakairo
- ALD
- Ngā oumu horapa
- Ngā raina hau parakore teitei
Ko ngā tātari konganuku porohita te mea e hiahiatia ana nā te mea he parakore, he ātete hoki ki te waikura.
10.2 Te Tātari me te Kimi Hau
Whakamahia i roto i:
- Kaitātari CO₂
- Ngā pūoko O₂ / H₂ / CH₄
- Ngā taputapu FTIR
- Ngā pūoko hau kawe
Ka whakarato i te rere pumau, ā, ka ārai i te poke o ngā matūriki.
10.3 Ngā Wāhi Tukatuka Matū
Whakamahia mō:
- Ngā tauhohenga pāmahana teitei
- Tātari whakarewa
- Te tiaki i te whakakorikori
- Tātari hau waikura
He tino pai te koranu nikara ki konei.
10.4 Pūnaha Korehau me te VCR / KF
- Ngā tātari tiaki pūwero KF16 / KF25 / KF40
- Ngā tātari gasket VCR
- Ngā rūma korehau
Ko te maitai kore waikura 316L te mea pai ake.
10.5 Te Aroturukitanga Taiao
- Ngā pūoko kounga hau
- Ngā teihana matawhenua
- Ngā pūnaha whakamātautau wai
Ka ārai te konganuku pūwero i te puehu, ngā pepeke, me ngā pata wai kei uru ki ngā pūoko.
10.6 Ngā Pūnaha Whakamarumaru me te Whakapūngao
Mō te whakaranu i ngā hau ki roto i ngā wai (ngā pūwero koiora, ngā tauhohenga matū, ngā taiwhanga).
- Te horapa o ngā mirumiru pai
- Te tohatoha tino ōrite
- Kāore he aukati
Ko ngā ngongo whakarewa pūwero (20–100 µm) te mea tino pai.
11. He aha i huri ai ngā kiritaki ki a HENGKO
Ka whakamahia ngā tātari konganuku pūngāwerewere puta noa i te tātari haurua-ā-ira, te matū hinu, te taiao, te tātari hau,
me ngā pūnaha aunoatanga ahumahi.
He maha ngā kamupene o te ao e whakamahi ana i ngā huānga konganuku pūngoi motuhake, engari e whakarato ana a HENGKO
hototahitanga katoa me ngā whakakapinga whakawhiti-tohutorome te mahi ōrite, te mahi pai ake rānei.
| Āhuatanga | MOTT / Ames / Ētahi atu | HENGKO |
|---|---|---|
| Whakaritenga OEM | He iti noa iho | Mutunga Kore (OEM/ODM katoa) |
| Wā Tukunga | Pōturi | Tere, ngāwari |
| MOQ | Waenga-Teitei | He iti te MOQ e wātea ana |
| Utu | Teitei ake | He iti ake te utu |
| Tautoko Hangarau | Kaha | Kaha + Tere + Ngāwari |
| Whare Pūoko OEM | Onge | Tohunga |
11.1 Ratonga Ritenga OEM / ODM
Ko te OEM/ODM te uho o te pakihi whakarewa pore a HENGKO.
E tautoko ana mātouwhakaritenga katoa, tae atu ki:
Ngā Tawhā Whakaritenga
| Tawhā Ritenga | Whakaahuatanga |
|---|---|
| Whakatauranga Micron | 0.1–100 µm (mana PSD tika) |
| Rauemi | 316L / Parahi / Titanium / Monel / Inconel |
| Ngā Ahu | OD/ID/Roa/Matotoru ka taea te whakarite kia rite ki te hiahia |
| Ngā Āhua | Kōpae, ngongo, koeko, kapu, kātereti, poraka |
| Atanga Miro | NPT, BSP, UNF, M10/M12, ritenga rānei |
| Whakaotinga Mata | Whakakanapa hiko, whakakorekore, whakakanapa |
| Whakarewa | Whakarewa taiaho, whakarewa TIG |
| Hanganga Pūwero | Te pūngao whakahaere (10–55%) |
| Te Mahi Rere | I hangaia kia rite ki ngā whāinga maturuturu pēhanga |
| Tohu / Tapanga | Tānga OEM, tohu laser |
| Tākai | PE ahumahi, ātete puehu, kōwhiringa rūma ma |
11.2 Te Rere o te Tukanga OEM
1. Kohinga Whakaritenga
Whakatauranga maikoroni / rauemi / tuhi / taiao / whāinga rere
2. Hoahoa me te Whakaari
Te tere rere, te tohatoha porosity, te tātari kawenga miihini
3. Te Hanga Tauira
Ngā tauira iti-rōpū (1–20 ngā wahi)
4. Te Whakamātautau me te Whakamana
Ngā whakamātautau tika mō te pēhanga, te matū, me te rahinga
5. Te Hanganga Papatipu
Te whakakorikori korehau + CNC + whakarewa + QC
6. Tākai me te Tukunga
Tākai kaweake ahumahi
Ngā Pātai Auau – Ngā Pātai Hangarau Noa
1. He aha te awhe paerewa mō te whakatauranga micron o te tātari whakarewa porous?
Kei te wātea ngā tātari whakarewa porous HENGKO mai i0.1 µm ki te 100 µm, me te PSD whaiti mō te mahi tātari pumau, ka taea te tukurua.
2. Ka taea te horoi me te whakamahi anō i ngā tātari whakarewa porous?
Āe. Ka taea te horoi mā te:
*Te horoi i te tuara
*Te horoinga ultrasonic
*Te horoi matū (waikawa/kawakore i runga i te rauemi)
*Tunu i te pāmahana teitei
Nā tēnei he tino iti ake te utu ki te whakataurite ki ngā tātari whakamahi noa.
3. He aha te ātete pāmahana mōrahi?
| Rauemi | Te pāmahana mōrahi |
|---|---|
| 316L | 400–500°C |
| Taitana | Tae atu ki te 600°C |
| Nikara Koranu | Tae atu ki te 600°C |
| Parahi | ~250°C |
4. He aha te pēhanga ka taea e ngā tātari whakarewa porous te tu atu?
I runga i te OD/ID me te matotoru, ka taea e rātou te tu atu ki:
*10–30 MPa(ngā ngongo 316L)
*5–20 MPa(ngā kōpae me ngā koeko)
Kei te wātea ngā tauira pēhanga teitei motuhake mēnā ka tonoa.
5. He pai ngā tātari konganuku pūwero mō ngā hau, ngā wai rānei e waikura ana?
Āe.
He pai te 316L mō ngā matū ahumahi whānui.
E taunakihia ana ngā koranu Titanium me Nickel mō:
*Ngā hau waikawa
*Ngā hau waikura
*Ngā wai waikura
*Ngā matū parakore teitei
6. Ka taea e koe te hanga i runga i ngā tuhi, i ngā tauira rānei?
Tino rawa.
Ka whakaaetia e mātou:
*Ngā kōnae CAD 2D/3D
*TAAHI/NGĀ
*Ngā tauira ā-tinana
*Ngā whakaritenga hangarau whakamuri
7. He aha te roanga o te wā arahi?
*Ngā Tauira:7–12 ngā rā
*Te whakaputanga papatipu:15–25 ngā rā
*Ngā ota OEM nui: ka whiriwhiria i runga i te rahinga
8. Kei te whakarato koe i te waitohu me ngā tapanga OEM?
Āe, e tautoko ana mātou i:
*Ngā waitohu i whakairohia ki te laser
*Takai tapanga tūmataiti
*Te tānga waehere pae OEM
9. He aha ngā ahumahi e whakamahi ana i ngā tātari whakarewa porous?
*Kaiwhakahaere Haurua
*Tātari hau
*Ngā tipu matū
*Te aroturukitanga taiao
*Ngā pūnaha wahie me te hauwai
*Ngā pūnaha korehau
*Taiwhanga me te hangarau koiora
10. Me pēhea taku tiki i tētahi whakatau utu hangarau?
Ka taea e koe te īmēra tika i ngā taipitopito o tō kaupapa ki:ka@hengko.com
Kua rite koe ki te tīmata i tō kaupapa tātari konganuku pūwero?
Ka whakaratohia e mātou te tautoko hangarau OEM/ODM katoa, mai i te hoahoa whakatauranga micron ki te huihuinga whakarewa kua whakakikoruatia katoatia.
Ahakoa e hiahia ana koe ki ngā tātari pūwero 316L, Titanium, Nickel rānei, ka taea e tā mātou tīma hangarau te āwhina i a koe ki te hanga i te otinga tika.
Īmēra mai ki a mātou ō hiahia: ka@hengko.com
- Kei te wātea te tautoko WhatsApp/WeChat mēnā ka tonoa mai
- Ngā Tuhi • Ngā Whakatakotoranga • Ngā Tauira • Ngā Hoahoa Whakarite
HENGKO – Tō Wheketere OEM Tātari Konganuku Porous Pono
